Media type C |
Available in grades 4,6,8 or 10 -
Air Flow: Inside to Outside |
|
The coalescing element
is made with our UNI-CAST construction.
Which is composed of an epoxy
saturated, borosilicate glass
micro-fiber media, this
media is used in applications
requiring the removal
of particulate and liquid
contamination. The outer
synthetic fabric layer allows
quick removal of coalesced
liquids.
Media type I is fabricated
similarly to the C media
but includes an additional inner
retainer intended for
added strength where
reverse flow is likely. |
Media type Q |
Available in grades 4,6,8 or 10 -
Air Flow: Inside to Outside |
|
This coalescing element
is composed of an epoxy
saturated, borosilicate glass
micro-fiber media, and is
also made with our unique
UNI-CAST construction.
This media has a builtin
pleated cellulose prefilter
as the inner layer. As with
the C and I media types, the
outer synthetic fabric layer
aids in the fast and efficient
removal of coalesced liquids. |
Media type D |
Available in grades 4,6,8 or 10
- Air Flow: Inside to Outside |
|
Media type D elements
are composed of a microglass
coalescer, utilize a
unique high temperature
UNI-CAST formulation,
however they are surrounded by
inner and outer diameter
metal retainers. These
metal retainers, coupled
with a glass drain layer,
make this an extremely
strong element designed to
remove both solid and liquid
contaminants at higher
temperatures. |
Media type 7CVP or ME |
Only available in 1¼" NPT port size
housings and larger
Air Flow: Inside to Outside |
|
Finite’s 7CVP media type has two filter layers between
metal retainers. The outer layer
removes aerosols while the
inner layer traps solid particles - this
protects and extends the life
of the outer layer. 7CVP elements
are used in bulk liquid coalescing
applications or when relatively
high efficiency and low pressure
drop are required. A distinctive
7DVP media is constructed the
same way, but it allows for
higher temperature applications.
Finite’s ME media type are
mist eliminator elements that
are constructed comparably to
the 7CVP, but offer even higher
filtration efficiency for more
critical compressed air quality
demands. |
Media type 100WS |
Water Separator Element
(removal of bulk liquids)
Air Flow: Inside to Outside |
|
This rolled stainless steel mesh
element has Inner and Outer Diameter metal
retainers with rolled stainless
steel mesh between them. It is an
extremely sturdy design. With a
nominal rating of 100 micron, this
media is used for the elimination
and reduction of excess liquids
in gas streams. It is also a good choice as a prefilter
for coalescing grades 6 and 10
where extreme volumes of liquid
contaminants are present. |
Media type 3P |
Interceptor Element
(removal of solids)
Air Flow: Outside to Inside |
|
Finite’s 3P pleated cellulose
element removes solid contaminants, with a 3 micron
absolute rating. Because this
element is designed to flow from
its outside to the inside, it has a
strong inner retainer that gives
it added strength. 3P
particulate “Interceptor” elements
are used where relatively
fine pore structure is required but very high dirt
loading is expected.
It may also be used as a prefilter to a
coalescing filter in systems where
high solid contamination exists. |
Media type A |
Adsorption Element
(removal of odor)
Air Flow: Outside to Inside |
|
This hydrocarbon vapor removal
element contains an ultra-fine
grained, highly concentrated,
activated carbon sheet media.
These elements are
designed to flow from the outside
to their inside, therefore they have a strong
inner retainer giving them added strength. This media type of element is
used to remove hydrocarbon vapor
and is often used to remove the
smell or taste of compressor lube
oil from breathing air. |